I recently bought a citroen xsara 1.4 1999 model. I was hoping to do it up as there is a few small jobs. There is a friend of a neighbors interested in buying it and I was wondering how much I should ask for. There are only a few problems
GOOD POINT
starts and runs well
4 new Tyre’s
smart interior
paint work is good
exhaust is newish
gearbox seems good
BAD POINT
no mot
no tax
rear suspension needs new shocks
rocker valve seal needs replacing
maybe brakes I am not sure

These are all small jobs I wouldnt mind doing myslef. Though I would like to sell the car to buy a one I would like. I was hoping to get around £350 for it as I think it is defiantly worth it. what do you guys think. please note I have seen a perfect condition car of the same model on ebay for £1,200 so I dont want to be robbed by this guy. thanks in advance.

i recently purchased a 2000 jetta on january and is now showing all types of problems such as 2 window regulators which amount to 0 dollars to fix them, the engine started just gave away today when i got off work and the car would not turn on, and finally the brakes and suspension are showing signs of wearing off. Now the dealership i bought the car from did not warn me of any of the above, they simply made it clear that the car was "as is". I bought it from a dealer because i wanted to avoid being ripped of on craiglist or ebay but this turned out to be worst. Can i take any legal action against the dealer so they could refund the amount i have payed for the car and help me pay what is left for the car to be fixed? thank you

I have less than a 1000 and what to add a little more accessory on my 2004 Honda CRV. so I got an cold air intake so I was thinking of getting a full catback exhaust from ebay that cost a total prices of 483 plus installation. Second that I have a 19" rims and low profile tires on my CRV so I was thinking of getting a Blistein HD suspension to lower it down and make it handle better and less road bumps and that cost 0 plus installation my Third choices which is not that much I require but I want to get a drill slot rotor and brakes so I can have a performance breaks and not get in accident that will cost me 5 plus installation. so please help me choice which one will you go with first to last.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab=Watching&viewitem=&item=270143650489&_trksid=p3907.m32

http://www.tirerack.com/suspension/Susptabl.jsp?autoMake=Honda&autoModel=CR-V&autoYear=2002&autoModClar=&brand=all

http://cgi.ebay.com/ebaymotors/Honda-CRV-02-04-Drill-Slot-Frt-Rr-Brake-Rotors-Pads_W0QQcmdZViewItemQQ_trkparmsZ72Q3a552Q7c39Q3a1Q7c66Q3a2Q7c65Q3a12QQ_trksidZp3286Q2ec0Q2em14Q2el1318QQhashZitem320279891218QQitemZ320279891218

I have less than a 1000 and what to add a little more accessory on my 2004 Honda CRV. so I got an cold air intake so I was thinking of getting a full catback exhaust from ebay that cost a total prices of 483 plus installation. Second that I have a 19" rims and low profile tires on my CRV so I was thinking of getting a Blistein HD suspension to lower it down and make it handle better and less road bumps and that cost 0 plus installation my Third choices which is not that much I require but I want to get a drill slot rotor and brakes so I can have a performance breaks and not get in accident that will cost me 5 plus installation. so please help me choice which one will you go with first to last.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab=Watching&viewitem=&item=270143650489&_trksid=p3907.m32

http://www.tirerack.com/suspension/Susptabl.jsp?autoMake=Honda&autoModel=CR-V&autoYear=2002&autoModClar=&brand=all

http://cgi.ebay.com/ebaymotors/Honda-CRV-02-04-Drill-Slot-Frt-Rr-Brake-Rotors-Pads_W0QQcmdZViewItemQQ_trkparmsZ72Q3a552Q7c39Q3a1Q7c66Q3a2Q7c65Q3a12QQ_trksidZp3286Q2ec0Q2em14Q2el1318QQhashZitem320279891218QQitemZ320279891218

I have less than a 1000 and what to add a little more accessory on my 2004 Honda CRV. so I got an cold air intake so I was thinking of getting a full catback exhaust from ebay that cost a total prices of 483 plus installation. Second that I have a 19" rims and low profile tires on my CRV so I was thinking of getting a Blistein HD suspension to lower it down and make it handle better and less road bumps and that cost 0 plus installation my Third choices which is not that much I require but I want to get a drill slot rotor and brakes so I can have a performance breaks and not get in accident that will cost me 5 plus installation. so please help me choice which one will you go with first to last.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab=Watching&viewitem=&item=270143650489&_trksid=p3907.m32

http://www.tirerack.com/suspension/Susptabl.jsp?autoMake=Honda&autoModel=CR-V&autoYear=2002&autoModClar=&brand=all

http://cgi.ebay.com/ebaymotors/Honda-CRV-02-04-Drill-Slot-Frt-Rr-Brake-Rotors-Pads_W0QQcmdZViewItemQQ_trkparmsZ72Q3a552Q7c39Q3a1Q7c66Q3a2Q7c65Q3a12QQ_trksidZp3286Q2ec0Q2em14Q2el1318QQhashZitem320279891218QQitemZ320279891218

Ive seen lots of used full-suspension frame for sale on ebay. Ive been mountain biking off and on on for the past 12 years, and have used a front suspension, and want an inexpensive full suspension. I realize that a used frame can have damage or can be slightly bent. I am wondering if it is difficult to put together all of the components from scratch, derailleur, brakes, ect.. thanks