it was a lttle akward making the video because I have to look through the cameras view finder to see what Im doing while I am working… I got this off ebay from user kinswoodusa and even though the description wasnt quite correct: it lists hemispherical rod ends…, I knew what they were and what they did, and didnt want to pay the money for a brand name, so I bought these. BIG mistake… theres so much play that it is impossible to set any of your front end alignment specs… now aside from the soft rubber, if he or she were to source the correct size (I guess I want to call it a spacer) and either make the bottom of the white part thicker or the thick part of the little stud a shorter distance from the head of it, the whole thing could at least be assembled tightly which would probably take alot of the stress off of the rubber, there would still be plenty of force against the rubber just because its at a major pivot point of the suspension, so as soft as it is I would bet it would eventually tear no matter what, but who knows…

WORKS ON: Yamaha V-max 1994-1996. 500 and 600 Models Standard 121″ Track. NOT the XT Model Upgrade your suspension fast and easy. Yamaha V-max snowmobiles are great, fun, reliable snowmobiles. But the rear suspension is very low to the ground. Adding 3.5 inch Drop Brackets is the simple and inexpensive answer. Immediately you will notice a major difference in the looks and handling . The steering is much more responsive and the deep snow performance will improve dramatically. ——- Same accessory as SLP sells as a Universal Rear Suspension Hanger, But these drop brackets are custom made so they are ready to install quickly. Made out of 3/16″ hardened steel so they are Strong. SLP and other manufactures are universal, so you have to do all the work,( ie: make patterns, drill, cut), to make them fit. Essentially your receiving a blank piece of steel. ———————– These are custom made Drop Brackets, Adding 3.5″ of height to your rear suspension. Drop Brackets measure 5″ x 7″. The whole project is very simple. Only takes 15 minutes to lift your old Yamaha rear suspension. Kit includes everything you need: 2 Drop brackets, nuts, bolts and instructions. For sale on Ebay: cgi.ebay.com

The eBay seller is part4u. The maker of the part is Black Dragon Power Factory. As far as the seller goes, he first sent the completely wrong fork set to me. When I questioned it, he said that I had better check and could be mistaken. I checked. I wasn’t. I sent the part back and he then found these and acknowledged that he had sent the wrong part. These too appear to be wrong. I wish I had returned them then rather than hanging on to them. In other news, the fender mount is similar and close, but not exactly the same. I was wrong. For purposes of following THIS build, I have chosen to name the bike Zara. If you search for it on my channel you will be able to locate all videos relating to this build.

Alright, I have a 1991 Honda Civic DX Hatch, and the person to own it before me bought some crappy Ebay Coilovers, which ride really hard and are really bad. So, what suspension parts do I need to buy to swap out the coilovers to stock springs, besides the springs themselves?
Thanks.

This is video footage of me finally getting the LED integrated tail lights to work as they should. Left blinker : CHECK Right blinker : CHECK Tail Light : which i was where i was screwing up : CHECK Brake light : CHECK Here’s a pic I took yesterday BEFORE i decided to just do away with the wiring harness that came with the LED tail light. I thought it made the job easier but it didn’t help at all. So I got rid of the harnesses and just went wire to wire! www.bikepics.com www.bikepics.com

I want to put some aftermarket coil over shocks on my 91 honda accord ex….I found a pair on ebay for a really good price. They aren’t very expensive, but they should do the trick, I just wanted to know, how long it should take and if it is hard to do myself……Is is a bolt on deal or do I need coil compressors and a bunch of equipment? Thanks…
Here is the link to the shocks that i want to put in.

http://cgi.ebay.com/ebaymotors/SKUNK2-90-93-94-97-Accord-Sport-Shocks-Lowering-Springs-_W0QQcmdZViewItemQQfitsZYearQ3a1991Q7cMakeQ3aHondaQ7cModelQ3aAccordQQhashZitem51939dd3baQQitemZ350368945082QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

hey, i was wondering if struts shocks and full coilovers are the same thing. i know coilovers can be adjusted but do u need struts and coilovers or if you have a full coilover like the link do you also need struts to go with them or is that an alternative

http://cgi.ebay.com/ebaymotors/SKUNK2-FULL-COILOVER-SUSPENSION-KIT-HONDA-CIVIC-92-00-_W0QQcmdZViewItemQQhashZitem56385c59caQQitemZ370312763850QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Ok here is a big problem.. I own an 01 Honda accord EX V6 sedan… I recently bought 18 inch rims and burned the springs to lower the car.. Now the car feels rough and you can feel every little bump in the street and i have to be really careful with the most little and insignificant bump because it will bend my rims..

I need to know what can i buy on ebay so i can lower my car and wont have any problems with my suspension.. Please include details so i can know what to buy.. I will really apreciate your answers alot.. Thanks

Alright i already have a Bomz racing intake and sonar altezza tail lights for my 01 Accord sedan, but:

which ones should i keep/remove from the list?

(oh and sorry im a level 1…copy and paste the links :/ )

Tsudo n1 catback exhaust:

http://www.eracingworks.com/TSUDO-N1-ACCORD-4CYL.-98-02-CATBACK-EXHAUST-p-21254.html

JDM Projector Headlights:

http://cgi.ebay.com/ebaymotors/98-99-00-01-02-HONDA-ACCORD-HALO-PROJECTOR-HEADLIGHTS

-/140432797519?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&fits=Year:2001|Model:
Accord&hash=item20b2726f4f#ht_6326wt_1165

Punisher Performance Chip

(This looks like a load of bullshit but id like your take on it anyway)

http://cgi.ebay.com/ebaymotors/PERFORMANCE-CHIP-HONDA-ACCORD-1990-2009-2001-2002-

/260639449806?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item3caf5262c
e#ht_7423wt_939

Chrome 4-2-1 Headers

http://www.slickcar.com/productdetails.asp?ProductID=7396

Dropzone Lowering springs

http://www.slickcar.com/productdetails.asp?ProductID=1631

(or should i just cut the suspension myself with a torch?? i know its risky but with professional help i think it would be beneficial..)

thanks in advance and let me know what you think